TECHNICAL BULLETIN #64 - Rev 1.00 (5/13/96)

==============================================================================
TITLE   : Host Mode - Users Can't Log In
PRODUCT : PROCOMM PLUS
==============================================================================

This document details how to set up PROCOMM PLUS' Host mode if users can't log
in.

Note:  In this discussion, the unattended computer which is running PROCOMM
PLUS' Host mode will be referred to as the "host PC"; the computer which is
connecting to the "host PC" will be referred to as the "local PC".

SYMPTOM:  THE HOST WILL NOT LET ME LOG IN WITH ANY NAME OR PASSWORD.

The host PC's Host mode is configured as a closed system.  The manager of the
host PC should follow this procedure:

1. Press <Esc> to exit PROCOMM PLUS' Host mode.

2. Press <Alt><S> to access the Setup Utility's Main menu.

3. Press <H> to select Host Mode Options.

4. Change option B, System type, to OPEN.

5. Press <Esc> twice to return to the Setup Utility's Main menu.

6. Press <S> to select Save Setup Options.

7. In Terminal mode, press <Alt><Q> to run Host mode and allow the local
   user to connect again.

==========================================================================
 To ensure that you have the latest version of this document, compare its
 revision number to that of the same document on any of our support sites.
This technical bulletin may be copied and distributed freely as long as it
     is distributed in its entirety and it is not distributed for profit.
         Copyright (c) 1996 Quarterdeck  All rights reserved.
==========================================================================