Telpar, Inc. Microsoft Windows NT 4.0 Driver Disk

SP50003.TXT
-----------------------------------------------------------------
Copyright (c) 1997 Telpar, Inc.
4181 Centurion Way
Addison, TX 75244
Ph  (800)872-4886
    (972)233-6631
Fax (972)233-8947
-----------------------------------------------------------------

Since The SP-5000/3 has only a 3.125 inch wide print area, two Windows
print drivers are provided which should allow for all printing
requirements.

The two drivers are as follows:

1) SP5000/3 - Partial Screen
   ------------------------------
   This driver will print 3.125 inches of the printable screen at the
   full 200DPI resolution of the printer. The print area will start at
   the left of the screen. For example, a printable document that is
   approximately 8" wide will be truncated so that the leftmost 3.125"
   will fit on the 3.125" wide SP-5000/3 print area.

2) SP5000/3 - Full Screen
   ------------------------------
   This driver will print all of the printable screen at the full
   200DPI resolution of the printer. With this driver the printout is
   reduced to the 3.125 inch print area of the SP-5000/3. For example,
   a printable document that is approximately 8" wide will be reduced
   to fit on the 3.125" wide SP-5000/3 print area.

It is recommended that the user installs both drivers and experiments
until the resolution that meets the application is determined.

End of SP50003.TXT document.